ISO 22002:2025 Prerequisite Programs: What Food Manufacturers Must Change

ISO 22002:2025 prerequisite programs applied on a food production line

ISO 22002:2025 prerequisite programs are now defined by a full international standard, and food manufacturers need a plan for the change. ISO 22002-1 was published in July 2025 and replaces ISO/TS 22002-1:2009, which is now withdrawn. If your food safety system still cites the old technical specification, your prerequisite programmes need a fresh look.

This guide explains what the new series covers, the seven changes that matter most and a five-step gap assessment you can start this month.

What ISO 22002:2025 prerequisite programs cover

The ISO 22002-1 page describes requirements for establishing, implementing and maintaining prerequisite programmes (PRPs) that control food safety hazards in food manufacturing. PRPs are the basic hygiene conditions of a site: buildings, utilities, cleaning, pest control, supplier controls and personnel hygiene. ISO 22002:2025 prerequisite programs sit beneath your hazard analysis and support ISO 22000 and schemes such as FSSC 22000.

The standard applies to organisations of any size in food manufacturing. It is used together with ISO 22002-100, which holds the common requirements.

Why does this matter commercially? Retailers and certification schemes expect PRPs to be current, and a customer audit that finds outdated references will question the rest of the file. Treating ISO 22002:2025 prerequisite programs as a planned project, not a last-minute fix, protects your certificates and your listings.

How the ISO 22002 series is organised

The series separates shared requirements from sector-specific ones. The table summarises the structure.

Document Role What to know
ISO 22002-100 Common requirements Read with every sector part
ISO 22002-1 Food manufacturing Replaces ISO/TS 22002-1:2009
Other sector parts Catering, packaging, transport and storage, feed, retail Check which part applies to your activity

7 critical changes in ISO 22002:2025 prerequisite programs

These are the changes a manufacturer should plan around. Check each against the published text before you rewrite any procedure.

1. A common core in ISO 22002-100

Requirements shared by every sector now sit in one document. For ISO 22002:2025 prerequisite programs, your site must meet the common core and the manufacturing part together, so a single-document review is no longer enough.

2. A technical specification becomes an international standard

ISO/TS 22002-1 was a technical specification. The new part carries the full status of an ISO International Standard, which affects how certification bodies, schemes and customers refer to it.

3. The 2009 specification is withdrawn

ISO/TS 22002-1:2009 no longer has a current status. Procedures, audit checklists and supplier questionnaires that quote the old clause numbers will need updating.

4. The manufacturing part has a defined scope

ISO 22002-1 covers food manufacturing only. Packaging, catering, transport, feed and retail operations should look to the part written for them rather than stretching the manufacturing text.

5. Justified exclusions are explicit

The standard allows an exclusion only when you can show that leaving it out does not adversely affect food safety. Write the reason down and review it at least annually.

6. Sites of every size are covered

The standard applies to small and large organisations alike. A small bakery cannot skip a requirement because it is small, but it can meet it in a proportionate way.

7. Alignment with ISO 22000 and certification schemes

PRPs feed directly into ISO 22000 and into schemes that reference ISO 22002 parts. Read our FSSC 22000 version 7 transition guide and the FSSC 22000 vs ISO 22000 comparison to see how the schemes fit together, and confirm your scheme owner’s transition rules.

How to prepare your ISO 22002:2025 prerequisite programs

Use these five steps for a gap assessment. The method suits a single factory or a group with several sites, and it starts with the documents you already hold.

Technician inspecting stainless steel equipment covered by ISO 22002:2025 prerequisite programs
Photo by TECNIC Bioprocess Solutions on Unsplash

1. Map your current PRPs

List every PRP, its procedure, its owner and the clause of ISO/TS 22002-1:2009 it was written against. This map becomes your gap-assessment worksheet.

2. Compare with ISO 22002-100 and ISO 22002-1

Mark each requirement as met, partly met or missing. Pay particular attention to the common core and to every exclusion you currently claim.

Check that your hazard analysis still points to the right PRPs. The HACCP plan guide explains how PRPs and the hazard control plan connect.

4. Close gaps with owners and dates

Assign each gap to a named person with a deadline and tie the work to your food safety objectives. Budget time for retraining, because changed procedures need competent operators. Good ISO 22002:2025 prerequisite programs work shows up in the quality of this follow-up, not in the volume of paperwork.

5. Verify through internal audit

Add the new requirements to your audit programme. Our ISO 22000 internal audit checklist is a good base for the questions.

A short example: a biscuit manufacturer with three sites

A biscuit group runs three sites with three different PRP manuals. The gap assessment shows the same cleaning and pest control rules written three ways. The team moves shared rules into one group procedure aligned with the common core and keeps only site-specific details locally. Audit preparation becomes simpler and repeat findings fall.

What auditors and customers will ask

Expect questions on how you identified the changes, who approved the updated PRPs and how you trained staff. Auditors usually start with a symptom, such as a pest finding or a cleaning failure, and trace it back to the procedure and its clause. A site with mature ISO 22002:2025 prerequisite programs can show that trail in minutes.

Keep dated evidence for each step:

  • The gap-assessment worksheet and its sign-off.
  • Revised procedures with version history.
  • Written justification for every exclusion.
  • Training records for staff who use the changed procedures.
  • Internal audit results on the new requirements.

Customers in the GCC often pass these questions down through their supplier approval process, so a clean file helps with retail listings too. For a wider market view of how the schemes are changing, see the SGS summary of FSSC 22000 version 7 key changes. See our guide on halal certification and ISO 22000 in the GCC for how the requirements combine in regional supply chains.

Conclusion: plan your ISO 22002:2025 prerequisite programs now

ISO 22002:2025 prerequisite programs bring a new structure, a common core and a withdrawn predecessor. Map your current PRPs, run the five-step gap assessment and update your audit programme before your certification body asks. Explore more food safety guides on the Standards Unlimited blog.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *