ISO 22000 Transition Roadmap: 6 Proven Phases to Start Now

ISO 22000 transition roadmap shown as a kanban planning board for a food safety team

An ISO 22000 transition roadmap sounds premature while the new edition is still a draft, yet the food businesses that plan early are the ones that sail through recertification. This guide shows where ISO 22000 stands today, what is and is not confirmed, and six practical phases your team can start now.

It is written for food safety managers, consultants and quality leads across the Gulf who hold ISO 22000:2018 certification, directly or through FSSC 22000, and want a calm, evidence-based plan instead of rumours.

Where ISO 22000 stands today

Before you build an ISO 22000 transition roadmap, you need facts about the standard itself. On its official ISO 22000:2018 page, ISO lists the 2018 edition as published and confirmed at its last review in 2023, so it remains current. The page also lists Amendment 1:2024 on climate action changes.

The next edition is listed separately. ISO/DIS 22000 is shown as a Draft International Standard in the enquiry phase, edition 3, and ISO states it will replace ISO 22000:2018. No publication date is given. ISO’s technical committee for food safety also reports that its working group meets in November 2026 to review comments, with a final-draft stage planned for early 2027.

What this means for your planning

A draft is not a requirement. Nobody can audit you against a document that has not been published, and the transition period only begins once the final standard exists. Your certification body will confirm the length and rules at that point. What you can do now is prepare, which is exactly what a good ISO 22000 transition roadmap is for.

Why an early ISO 22000 transition roadmap pays off

Transitions rarely fail because the new text is hard. They fail because teams start late, discover gaps during the transition audit and rush evidence together. An early ISO 22000 transition roadmap spreads the work across normal management cycles instead.

There is also a scheme angle. If you certify through FSSC 22000, the FSSC update on Version 7 describes a 12-month transition period and refers to the new ISO 22002-x:2025 series on prerequisite programmes. Our comparison of FSSC 22000 vs ISO 22000 explains how the two relate, so check which clock applies to you.

For Gulf food businesses that supply hotel groups, retailers or export customers, there is a commercial reason too. Buyers may ask about your certification and transition status in supplier questionnaires, and a clear, dated plan answers that question before it becomes a concern.

The 6-phase ISO 22000 transition roadmap

Use these phases as a working plan. Each one produces evidence you can show an auditor, and none of them depends on the final wording being published.

Phase 1: Confirm your baseline

Start by proving your current system is sound. Review open nonconformities, the last internal audit and the last management review under clauses 9.2 and 9.3. An ISO 22000 transition roadmap built on a shaky baseline simply carries old problems into the new edition.

Phase 2: Track the revision, not the rumours

Name one person to monitor ISO and your certification body for updates, and record the status in your management review. Our earlier guides on the ISO 22000:2018 vs 2026 comparison show the direction of the draft, but treat any draft-based change list as provisional.

Phase 3: Run a draft gap assessment

Compare your system with the draft in a light-touch way. List where your current documents, hazard analysis and records might need adjusting, and mark each item as confirmed, likely or unknown. Keep it as a working list, not a rewrite.

A simple way to keep the list useful is to give every item an owner and a target quarter. Items marked unknown should have a review date rather than a deadline, because the final text may settle them without any action from you.

Two colleagues sketching an ISO 22000 transition roadmap gap assessment on a whiteboard
Photo by Kaleidico on Unsplash

Phase 4: Strengthen your prerequisite programmes

This is the one area where the ground has already moved. The ISO 22002 series has been reissued, so review your prerequisite programmes now. Our article on ISO 22002:2025 prerequisite programs walks through what food manufacturers must check.

Phase 5: Build culture and risk evidence

Auditors always test whether the system works in practice. Document how leaders talk about food safety, how staff report concerns and how risk drives your controls. See our guides on food safety culture and risk-based thinking in ISO 22000 for practical evidence ideas.

Phase 6: Plan the change under clause 6.3

ISO 22000:2018 includes planning of changes to the system, so manage the move to a new edition as a formal change. Set owners, dates, training and a document update plan inside your ISO 22000 transition roadmap, and agree the audit timing with your certification body once the transition rules are published.

ISO 22000 transition roadmap example: a Dubai dairy

Picture a mid-sized dairy processor in Dubai supplying supermarkets and hotel kitchens, certified to ISO 22000:2018. The quality manager builds an ISO 22000 transition roadmap on one page, with six rows matching the phases above, an owner for each and a review date in every quarterly management meeting.

In the first quarter, the team closes two old corrective actions and re-checks its cleaning and pest control programmes against the new ISO 22002 series. In the second, it runs a draft gap assessment and tags each item as confirmed, likely or unknown. When the draft changes, only the tags change, not the whole plan.

When the final standard is published, the dairy already has a controlled change plan, current prerequisite programmes and a clean baseline. The ISO 22000 transition roadmap turns a stressful deadline into a routine audit conversation.

Common mistakes in an ISO 22000 transition roadmap

  1. Rewriting the system against a draft. Drafts change, so keep your work in a gap list until the text is final.
  2. Ignoring the scheme rules. FSSC 22000 sites follow scheme timelines as well as ISO ones.
  3. Skipping the baseline. Open nonconformities travel with you into any new edition.
  4. Leaving it to one person. Share ownership across production, quality, procurement and maintenance.
  5. Not telling your certification body. Ask early how they will handle transition audits and timing.

Avoid the temptation to buy a new documentation pack before the standard is final. Spend the effort on evidence your system will need under any edition.

Conclusion: start your ISO 22000 transition roadmap now

The new edition is still moving through the ISO process, so there is no deadline to panic about, but there is plenty of preparation to do. A short, practical ISO 22000 transition roadmap built on a sound baseline, current prerequisite programmes and clear ownership will serve you whichever way the final text lands. Start with Phase 1 this month, record the plan in your next management review and revisit it whenever ISO or your certification body publishes news.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *